How do I charge the battery for the unit?

The battery is charged while inside the unit. Use the charger provided and plug directly into the USB-C port on the PRO 3.0 beside the power button. The light above the power button will turn blue when the battery is charging.

Does it matter which side is facing the mound/home plate?

Yes, the mono side that has the red arrow should be facing the mound and the stereo side should be facing home plate.

How close can it be to another bullpen session or batting cage?

For best results, each mound or batting cage should be 10-12 ft. apart.

What do the lights on top of the unit mean?

Flashing red : The unit is powering on Solid red: The unit is disarmed Green: The unit is armedBlue: The unit is processing a pitch/hit White: Unit is streaming calibration images to the Diamond App

How do I calibrate the unit?

Follow the process in our Quick Start Guide After setting up the unit and connecting to it in the Diamond App, tap on the PRO 3.0 icon in the bottom right corner of the Play screen Tap on the “Recalibrate” button The lights on top of the unit will turn white and Diamond App will display calibration streams of all 3 cameras Set up the calibration board flush with the front edge of home plate. Also make sure the board is level by using the bubble level on top of the board. Make sure the red azimuth line for the Mono camera is in line with the middle of the rubber. Then make sure both red azimuth lines on the Stereo cameras are landing on the calibration board. Note: if the line on the Mono camera is in line with the middle of the rubber, but the two Stereo lines are not on the board, make sure the unit is directly in line between home plate and the mound. Once all 3 cameras are lined up, tap the “Field Calibration” button in the bottom right corner You should get a “Calibration Successful” message, after which tap the “Done” button that will populate in the bottom right corner to save the calibration. Note: If the calibration is not successful, follow the instructions from the popup message at the bottom of the screen and attempt this step again. Again, make sure the unit is set up correctly and that the calibration board is level.

How do I start a Live-on-Live session?

To perform a live-on-live session, you must first choose the Multiplayer setting in the Diamond App. To do this, follow these steps: Play Screen>Multiplayer>select all the pitchers and hitters you wish to record data with>Select a Live-on-Live session classification From here, you will be able to drag and drop players into a Hitters or Pitchers list for the session. Players that are only listed as Pitchers or Hitters will auto populate into the corresponding column. Once you start the session, you will be able to tap on the left and right arrows of both the hitters and the pitchers to navigate between players

Does PRO 3.0 work with Rapsodo Game Mode?

Yes! Follow the same setup procedure with the PRO 3.0 and Diamond App, then choose the Game Mode session classification.

Rapsodo® Pro 3 Baseball Training Tool | Rapsodo®

PRO 3.0 - Hitting/Pitching Unit PRO 3.0 - Hitting/Pitching Unit MOBILE LAUNCH MONITOR + 1 YEAR PREMIUM MEMBERSHIP REFURBISHED MLM + PREMIUM MEMBERSHIP REFURBISHED MOBILE LAUNCH MONITOR (MLM) REFURBISHED MLM + 1 Year Premium Membership

Payment Options:

$8,500.00

PRO 3.0 - Hitting/Pitching Unit PRO 3.0 - Hitting/Pitching Unit REFURBISHED MOBILE LAUNCH MONITOR (MLM) + PREMIUM MEMBERSHIP REFURBISHED MOBILE LAUNCH MONITOR (MLM)

The most advanced baseball vision technology from Rapsodo
3 cameras + 2 radars capture full ball flight with precision accuracy
Capture hitting + pitching live-on-live with one device
The first practice product to measure seam orientation and seam shifted wake
75% faster processing and 8 hour battery life
Always portable and built for indoor + outdoor environments
NEW Edgertronic integration, seamlessly connect an Edgertronic high-speed camera.